Cyclone Galvanised Vertical Brace Gate

Products and Sizes AIRR Code/s
Cyclone Galvanised Vertical Brace Gate Cyclone-Galvanised-Vertical-Brace-Gate
Product Details
  • Welded mesh insert features graduated horizontal wires which increase the density of the strands in the lower part of the gate.

  • Produced from 25NB hot dipped galvanised pipe, with a wall thickness of 2mm, and mesh spacing graduating from 32mm at the bottom of the gate, to a maximum of 100mm at the upper part of the gate (5mm wire thickness).

  • Welded collar attached at hinge end to increase compatibilty with a broader range of gate hardware, including brooker hinges.

  • The pipe used in the gate frame and brace is hot dipped galvanised both inside and out providing corrosion resistance.

  • Each MOQ packed with both left and right hand side configurations and palletised for safer and easier handling.

  • Full notch weld construction.
    Available in sizes: 1.17m (4 foot), 1.47m (5 foot), 1.77m (6 foot), 2.37m wide (8 foot),
    2.97m wide (10 foot), 3.57m wide (12 foot), 4.17m wide (14 foot),
    4.77m wide (16 foot)

Additional Information

Size No
Additional Information No
Website link 1 No
Website link 2 No
Website link 3 No
Media link 1 No
Media link 2 No
Media link 3 No
Phone No
+ Add to Wishlist

Interested in buying this product?
Add it to your wishlist and we'll let you know if your local store has it in stock.

Sign up to receive specials from your local AIRR member

Newsletter